SWX2210P-10GL2 Switch

SWX2210P-10G is a smart L2 switch that can supply power to PoE powered devices on the network. Yamaha has integrated its own expertise in networking and professional audio fields and developed it as an L2 switch optimized for Dante audio networks.

Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily.

IGMP and QoS settings can be automatically optimized for Dante network operation by simply selecting the Dante profile in the web-based GUI. These network settings are not critical in simple systems, but proper configuration is essential to ensure maximum stability in larger Dante networks.

In the Web GUI's ProAV Settings enables to assign settings for major ProAV profiles like Dante, NDI, and so on to ports with just a click. This makes it easy to use both NDI and Dante on the same switch.

Additionally, the ProAV Settings screen in the Web GUI allows you to easily check multicast settings and operations. It clearly shows multicast activity, which helps quickly resolve issues that often cause problems in ProAV networks.

The SWX2210P-10G is a smart L2 switch optimized for Dante networks, known worldwide for AoIP, allowing integrators to quickly establish stable networks by simplifying settings, monitoring, management, and operation. When Dante PoE devices, like the VXL1-16P, are connected to the SWX2210P-10G, settings optimized for Dante are automatically applied via LLDP, a protocol for exchanging system management data between neighboring devices. PoE+ compliant ports can supply up to 30W to each port simultaneously, powering not only PoE compliant devices like wireless access points, but also higher-output PoE+ devices such as the VXL1B-16P, VXL1W-16P, VXC2P, and RM-CR.

Yamaha LAN Monitor is a dedicated software that allows for quick troubleshooting. Easily check PoE status, turn PoE on/off, and use the snapshot function to detect any differences or faults in the network state since setup. The web GUI provides a full range of monitoring functionality, including dead/alive monitoring for PoE devices, allowing you to restart a PoE device if a fault occurs and receive email notifications of faults.

Take a “snapshot” when the network is initially set up to automatically keep track of any alerts or setting changes that could cause trouble like cable disconnections, devices turning off, or incorrect connections made prior to performances.

Identifying devices connected to a switch with only IP or MAC addresses is a difficult and error-prone approach. Dante devices can use icons and device IDs when set up via the Dante Controller software. Label and Comment fields also let users add useful info, like the location of the device.

Mounting accessories (sold separately) can be used to mount units in a 19-inch rack (RK-SWR) or on a wall (WK-SWR), further expanding your choice of installation locations. (Do not install units with the LAN ports facing upward/downward or from ceilings with a height of 2m or less.)

A one-stop sound solution for remote conferencing that improves the quality of voice communications.

Dante vervangt dikke, dure analoge of meeraderige bekabeling door LAN-kabels zoals CAT5e en CAT6.

Omdat Dante gebruik maakt van logische routering in plaats van fysieke punt-tot-punt verbindingen, kan het netwerk geconfigureerd worden met behulp van beschikbare poorten met slechts een paar klikken.

Systemen met Dante kunnen ook eenvoudig worden uitgebreid.

Bovendien ondersteunt Dante redundantieconfiguratie, waardoor betrouwbaarheid zelfs in noodsituaties wordt gegarandeerd.

The SWX2210P-10G is a smart L2 switch optimized for Dante networks, known worldwide for AoIP, allowing integrators to quickly establish stable networks by simplifying settings, monitoring, management, and operation. When Dante PoE devices, like the VXL1-16P, are connected to the SWX2210P-10G, settings optimized for Dante are automatically applied via LLDP, a protocol for exchanging system management data between neighboring devices. PoE+ compliant ports can supply up to 30W to each port simultaneously, powering not only PoE compliant devices like wireless access points, but also higher-output PoE+ devices such as the VXL1-16P, VXC2P, and RM-CR.

Upon connection, Dante devices like the VXL1B(W)-16P will automatically configure settings via LLDP to turn off EEE, update QoS settings, and others to optimize those devices for Dante networks.

Upon connection, Dante devices like the VXL1B(W)-16P will automatically configure settings via LLDP to turn off EEE, update QoS settings, and others to optimize those devices for Dante networks.

Upon connection, Dante devices like the VXC2P will automatically configure settings via LLDP to turn off EEE, update QoS settings, and others to optimize those devices for Dante networks.