MRX7-D

All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.

DCP1V4S Digitaal bedieningspaneel

Een met 1 volumeregelaar en 4 schakelaars uitgerust bedieningspaneel voor wandmontage voor de MTX/MRX-serie en de MA/PA-serie. Eenvoudige aansluiting door CAT5 met RS485 + voeding. Er kunnen maximaal 8 DCP's op 1 apparaat van de MTX/MRX-serie worden aangesloten. Er kan 1 DCP1V4S op 1 MA2030a/MA2030 worden aangesloten. Er kunnen maximaal 2 DCP's op 1 MA2120 of PA2120 worden aangesloten.

DCP4S Digital Control Panel

4 Switch equipped Wall Mounut Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCP4V4S Digitaal bedieningspaneel

Een met 4 volumeregelaars en 4 schakelaars uitgerust bedieningspaneel voor wandmontage voor de MTX/MRX-serie en de MA/PA-serie. Eenvoudige aansluiting door CAT5 met RS485 + voeding. Er kunnen maximaal 8 DCP's op 1 apparaat van de MTX/MRX-serie worden aangesloten. Er kunnen maximaal 2 DCP's op 1 MA2120 of PA2120 worden aangesloten.

DCH8 Digital Controller Hub

Divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines.

PGM1 Paging Station Microphone

The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.

  • Dante network support
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 4 units can be connected per system
  • PoE powered
  • Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
  • Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

PGX1 Paging Station Extension

The PGX1 is a paging station extension that can be used with the PGM1.

  • Function expansion for the PGM1
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 2 units can be connected to each PGM1
  • Dimensions: 132(W) × 56(H) × 154(D) mm
  • Weight: 0.9 kg (excluding connecting bracket)

MCP1

Wall-Mount Controller

  • 6 buttons can be assigned to perform control functions (via ProVisionaire Design or MTX-MRX Editor)
  • Multi-language displays supported
  • Four user levels for access management
  • Up to 16 units can be connected per system
  • PoE powered
  • Back can adapter supplied
  • Dimensions: 149(W) x 125(H) x 18(D) mm
  • Weight: 0.5 kg

SWR2100P-10G L2 Switch

The SWR2100P series network switch equipped with ten RJ45 ports.

  • Ports available for PoE power supply: 1-9 / Up link port: 9 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2100P-5G L2 Switch

The SWR2100P series network switch equipped with five RJ45 ports.

  • Ports available for PoE power supply: 1-4 / Up link port: 5 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2311P-10G L2 Switch

Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily

  • LAN ports equipped with PoE supply: 8(1-8)
  • LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used)
  • PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports
  • In-build RADIUS server for advanced security management

EXi8 Input Expander

EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from MTX/MRX series processor via Ethernet cable.

EXo8 Uitgangsuitbreiding

EXo8-uitgangsuitbreidingen zijn uitgerust met 8 kanaals-DA-converters die analoge audio van hoge kwaliteit produceren door omzetting van digitale uitvoer van MTX/MRX-serieprocessoren via YDIF.

Exi8/ Exo8 Specifications

  EXi8 EXo8
Sampling frequency 48kHz/44.1kH
Signal delay Less than 2.5ms
Total harmonic distortion Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range 107dB (Gain:-6dB)
Equivalent input noise (EIN) -126dBu (Gain: +66dB)
Phantom power +48V (per channel; individually settable)
Crosstalk -100dB (@1kHz)
Heat dissipation (per hour) 21.5 kcal max.
Power supply voltage 100V 50/60Hz
Power consumption 25 W max.
Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U
Included items Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal GAIN Actual load impedance For use with nominal Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock
-6dB +10dBu +30dBu

EXi8 Digital Input Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45

EXo8 Analog Output Specifications

Output terminal Actual Source impedance For use with nominal Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

EXo8 Digital Output Specifications

Terminal Format Level IN/OUT Connector
YDIF Out YDIF RS-422 16OUT RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal Format Level Connector
Network Ethernet 100Base-TX - RJ-45